The transformer is a heart of power system and this heart should beat till it’s useful life for feeding all kinds of load requirement of all types of consumers/products without any interruption.

Despite being a very simple and robust device, transformer gets failed well before there useful life or we can say die a premature death in most of the cases.

In our country barring few private utilities where the failure rate of overall power and distribution transformers are less than 1 %, the failure rate of transformers is very very high elsewhere.

We provide Solution and Guidance to reduce the failure rate of transformers which are due to reasons listed below

• Quality
• Installation & Commissioning
• Protection
• Operation &Maintenance
• Condition Monitoring
• Lack of Know how & skills of people
• Theft cases
• Age

etc.

We provide solution and Guidance to meet the challenges listed below

• Life of transformer
• Lesser footprint
• Environment-friendly
• Zero Fire Hazard
• Low on maintenance
• Low losses and High Efficiency
• Usage /Scrapping of Old defective stock of transformers.

Being channel partners of  OEM’s of a complete segment of transformers and using our deep sector and technical experience we always are the first to know new technological development,  which helps our clients to meet the objective of maximizing operational efficiency and prepare for continued growth.

HT and LT  switchgear are vital equipment in Electrical network in the power system. They are protection device used to make and break the circuit as and when required and most important is to isolate the faulty circuit in time in any type of fault condition.

Despite being highly reliable & safe equipment, they get failed /malfunction well before there useful life or we can say die a premature death in most of the cases.

In our country barring few private utilities where failure rate /malfunctioning of circuit breakers are less than 1 %, failure rate/malfunctioning of circuit breakers is very very high elsewhere.

We provide Solution and Guidance to reduce the failure rate of switchgear which are due to reasons listed below

• Installation & Commissioning
• Operation &Maintenance
• Condition Monitoring
• Lack of Know how & skills of people
• Theft cases

etc.

We provide solution and Guidance to meet the challenges listed below

• Life of switchgear.
• Utilization of protection system properly
• Updation of protection system with the latest technology
• Proper utilization of all accessories of RMU/Circuit breakers
• Gas leakage from SF6 RMU
• Usage /Scrapping of Old defective RMU/Circuit breaker.

Etc.

Being channel partners of  OEM’s of a complete segment of switch gears and using our deep sector and technical experience we always are the first to know new technological development,  which helps our clients to meet the objective of maximizing operational efficiency and prepare for continued growth.

Power distribution is the most crucial link in the electricity supply chain and has a great significance in respect to impact on the sector’s commercial viability, and ultimately on the consumers who pay for power services.

The distribution system continues to carry electricity from the point where transmission leaves off, that is, at the 66/33 kV level.

Depending upon the quantum of power and the distance involved, lines of appropriate voltages are laid.

The main distribution equipment comprises HT and LT lines, transformers, substations, switchgear, capacitors, conductors and meters.

HT lines supply electricity to industrial consumers while LT lines carry it to residential and commercial consumers.

We provide solution and Guidance  on following

• Power Sector Scenario, Power Regulations in India
• Understanding the Power Distribution System, Fundamentals of Electrical Power System
• Main components of the Distribution System
• Installation of 33/11 KV and 11/0.433 KV Substation and other equipment and Network lines
• Earthing of Various Equipment
•  Testing & Maintenance of Distribution System
•    Best practices in Operation and Maintenance
• Health and Safety Practices for Power related works

Etc.

Energy is one of the most important components of economic infrastructure. It is the basic input required to sustain economic growth.

As of 31st  July 2018, following is the share of sources of energy in India.

Thermal ( Coal, Gas, Diesel) –  222.6 GW ( 64.3% ), Renewable – 71.51 GW (20.6 %) ,  Hydro – 45.3 GW( 13.1 % ), Nuclear –  6.8 GW (2%)

Total installed power capacity of India is 346.02 GW and Renewal energy potential is >1000 GW ( Solar 750 GW, Wind 300 GW, Bio 25 GW, Small Hydro 15 GW)

Coal, Nuclear, Gas & Diesel are non- renewable sources, with harmful emissions and going to exhaust by this century.

Hence Solar, Wind, Tidal, Bio which are renewable sources of energy are the solution for the future and their growth and development is the need of the hour.

Our country having huge potential to generate safe and cheap energy by renewable sources is running one of the largest and most ambitious renewable capacity expansion programs in the world.

The total installed capacity of renewable energy as on 31^st July 2018 is 71.51 GW ( Solar 23.11 GW, Wind 34.40 GW, Bio 9.51 GW, Small Hydro 4.49 GW )

Renewal energy target by 2022 is  175 GW ( Solar 100 GW, Wind 60 GW, Bio 10 GW, Small Hydro 5 GW ) This shows the potential in the field of  Solar Energy

Out of 100 GW target for Solar energy, 40 GW is a target for Rooftop solar and till now only 2 GW has been achieved.

Solar Rooftop has great potential and can indeed be a game changer in attaining 100 GW of Solar Energy by 2022.

We provide solution and Guidance on the subject listed below

• The advantage of rooftop solar among owner (Residential, Institutional, Commercial, Industrial )
• Government schemes/ policies on rooftop solar among owner (Residential, Institutional, Commercial, Industrial)
• Survey and analysis for a feasibility study for rooftop solar plant installation and generation.
• Sizing of the rooftop solar plant.
• Selection of the type of plants to be installed. ( Off-Grid, Grid Tie, Hybrid )
• Safety and protection measures.
• Type of metering (Net /Gross)
• Selection of products and EPC companies.
• Costing of the overall project.

etc

Being channel partners of  OEM’s of a complete segment of  Solar power plant and using our deep sector and technical experience we always are the first to know new technological development,  which helps our clients to meet the objective of maximizing operational efficiency and prepare for continued growth.

Will be launched soon